by Mats Mats

513F, högtrycks flervägs flänskulventil DN 15-50/1/2″-2″

HÖGTRYCK 513 TYP Flervägs kulventil
513F & 513T ventiler är högtrycks 3/4-vägs kulventiler. Ventilen har en mängd olika ändtyper
av fläns ANSI 600/900/1500 eller gänga/SW/BW. Ventilen är tappdesign för högtrycksdifferens.
Ventilen är med ISO 5211 direktmonteringsdyna som standard för montering av ställdon.

OLIKA FLÖDESMÖNSTER
Sidoingång, botteningång, …osv.
Flervägs kulventil (eller kallad multiport) kan användas som 3/4-vägs kulventil men större möjlighet
på mycket smarta sätt att spara mycket utrymme och rörkostnader genom att välja olika kultyper.
Mediet kan flöda in i ett riktigt 3D-rörsystem som ditt krav, ventilen kan vara med 3-vägs, 4-vägs
eller till och med 5-vägs, botteningång , sidoingång, vertikal, mix, avledning är alla tillgängliga.

Metallsäten flervägsventiler är lämpliga för media med hög temperatur eller partikelinnehåll.

by Mats Mats

Trevägs kulventil med packbox – 4 säten, KM 93-SB

Trevägs kulventil (avstängningsventil)
Används för att justera arbetsämnets flödeshastighet,
det kan inte användas som strypning eller reglering av beslag. För temperaturer från −60 °C till +230 °C.
Lämplig för vatten, vattenånga, gaser, oljor, petroleum, syror, alkalier och andra vätskor och gaser som
är fria från mekaniska föroreningar.

Godkänd för PED-vätskor grupp 1 (farliga) och 2 2014/68/EU.

Storlek
DN 10 – DN 150, PN 16 – PN 100
NPS 1/2″ – NPS 6″, klass 150 – klass 600

by Mats Mats

KM 9103.X-HT DN 10–100 PN 16–160 HIGH TEMPERATURES

Application
Ball valve: is isolating valve designed to fully open or close the service fluid flow. It is not designed to be used for throttling or regulating purposes. For temperatures up to +500 °C (for temperatures above +400 °C for non-oxidizing fluids only).
Suitable for water, steam, gas, oil, heat transfer fluids and other liquids and gases without mechanical impurities.
Approved for fluids in groups 1 (hazardous) and 2 according to 2014/68/EU.

Production range
DN 10 – DN 100, PN 16 – PN 160
NPS ½″ – NPS 4″, Class 150 – Class 900

Characteristics
floating ball,
full bore,
anti-static design,
stem secured against release (anti-blow-out),
stuffing box,
sealed with Graphite.

Operation
hand lever,
hand wheel with worm gear,
pneumatic actuator,
electric actuator.

Connection to piping
internal thread (KM 9101.X-HT) – G (BSPP), NPT, R (BSPT), Rp
weld end (KM 9103.X-HT) – butt or socket
flanged (KM 9108.X-HT) – EN, API, GOST

by Mats Mats

Flanged Ball Valve Type AF94D / DN15– DN150 short pattern

Flanged Ball Valve Type AF94D / DN15 – DN150
2-piece DIN-Flanged Ball Valve short pattern, full bore, floating ball, with double seal system FireSafe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Top flange for direct mounting for Actuator. With locking device. Standards on stock. With locking device. Standards on stock.

Overview
Nominal pressure: PN16/40

Face to face: acc. EN558 series 27

Body material: Carbon steel 1.0619 Stainless steel 1.4408

Connection ends: DIN-Flansche to EN 1092-1 Form B1

Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request

Specials: Double seal -and pressure relieving system

Others: Other flange facings on request

by Mats Mats

Wafer Ball Valves Type AF80D / DN15– DN150

Wafer Ball Valves Type AF80D / DN15 – DN150
Wafer type AF80D ball valve with full bore, floating ball, with ISO mounting pad for direct mounting of pneumatic or electrical actuator. FireSafe acc. ISO 10497 / API607, TA-Luft and SIL 2 approved, antistatic device. Hand lever with locking device.

Overview
Nominal pressure: PN16/40

Body material: Stainless steel 1.4408 Carbon steel on request

Connection: between DIN-Flanges acc. to EN 1092-1 Form B1

Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request

by Mats Mats

Flanged Ball Valve Type JBFM / DN15– DN250 / ½″– 10″

Flanged Ball ValveType JBFM / DN15 – DN250 / ½″ – 10″
2-pieces metal seated DIN-/ANSI Flange Ball Valve PN16/40, PN100 on request. ANSI class150, 300 and 600. DIN-Face to face dimension acc. EN558, row 27 or ANSI-dimensions acc. ASME B16.10, full port, floating ball, FireSafe acc. nach ISO 10497 certified. Antistatic, with ISO connection for Actuator mounting kit. With locking device. Different body materials and designs available for applications up to 500 ° C.

Overview
Pressure nominal: PN16/40/100, ANSI cl.150,300,600

Face to Face: acc. EN558 row 27, ASME B16.10

Body material: Carbon steel 1.0619/A216 WCB Stainless steel 1.4408/ A351 CF8M

Connections: Flanges DIN/ANSI acc. to EN 1092-1 form B1 or ANSI B16.5 RF

Sealing system: metal seated Stellite© or Tungsten carbide, others on request

by Mats Mats

Segment control valves Type JSB/ DN25– DN500 / 1″– 20″

Segment control valves Type JSB / DN25 – DN500 / 1″ – 20″, JDV Control Valves©
1-piece Trunnion Design DIN PN16/40, or ANSI class150/300, in wafer and flanged design, for Control- or Shut off – applications, soft- and metal seated Design, with ISO mounting pad acc. to ISO5211, Antistatic, Face to Face dimensions acc. to ISA S75.04/EN558 series 36, For applications up to 350°C.

Overview
Design: as wafer or flanged design

Sizes: DN25 – DN500 / 1″ – 20″

Pressure class: PN16/40, ANSI cl.150/300

Body material: Carbon steel 1.0619 / A216 WCB Stainless steel 1.4408/A351 CF8M

Seat material: soft- and metal seated

by Mats Mats

3-piece Ball Valves Type JBSM/ DN15– DN50 / ½″– 2″

3-piece Ball Valves Type JBSM / DN15 – DN50 / ½″ – 2″
3-piece metal seated ball valve, full bore, floating ball, antistatic device with ISO-mounting pad for mounting of pneumatic or electric actuators. With locking device.

Overview
Nominal pressure: ASME cl. 600 / PN100 600 / PN100

Body material: Carbon steel 1.0619 / A216 WCB Stainless steel 1.4408 / CF8M

Connection ends: BW, SW, BSP, NPT a.o.

Sealing system: metal seated Stellite© or Tungsten carbide, others on request

Others: Standard on stock

by Mats Mats

Flanged Ball Valve Type AF90D / DN15 – DN100 long pattern

Flanged Ball Valve Type AF90D / DN15 – DN100
2-piece DIN-Flanged Ball Valve long pattern, full bore. With double seal system, floating ball, Fire-Safe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Flange for direct mounting for Actuator. With locking device. Standards on stock.

Overview
Nominal pressure: PN16/40

Face to face: acc. EN558 Row 1

Body material: Carbon steel 1.0619 Stainless steel 1.4408

Connection ends: DIN-Flansche to EN 1092-1 Form B1

Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request

Specials: Double seal -and pressure relieving system

Others: Other flange facings on request