15
Yes
None
1
1000000
Search...
/produkter/smutsfilter/
Thumbnail
Sort By:

Produkt Val

Smutsfilter
Smutsfilter
Strainer PN 20, Y-type with screwed ends and drain plug, 30 Bar
Strainer PN 20, Y-type with screwed ends and drain plug, 30 Bar Image

Materials:
Body:
brass MS 58
Screen: stainless steel 1.4301
Connection: screwed ends DIN 259
Test pressures: 30 bar
Specials: Brass fittings are not approved for use in drinking water installations!

Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar Image

Materials:
Body:
forged steel A 105N,
Screen: stainless steel AISI 316
Gasket: graphit reinforced
Connection: screwed ends BSP
Test pressures: 205 bar

Strainer PN 40 Y-type, with screwed ends, 60 Bar
Strainer PN 40 Y-type, with screwed ends, 60 Bar Image

Materials:
Body
:stainless steel 1.4408,
Screen: stainless steel perforated plate 1.4408
Gasket: PTFE
Connection: screwed ends BSP
Test pressures: 60 bar

Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar Image

Materials:
Body: stainless steel AISI 316.
Screen: stainless steel AISI 316.
Gasket: graphite reinforced.
Connection: screwed ends BSP.
Test pressures: 205 bar.

Strainer PN 63 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 96 Bar
Strainer PN 63 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 96 Bar Image

Materials:
Body: cast steel GP 240GH).
Screen: stainless steel 1.4301.
Gasket: graphit reinforced.
Connection: butt-weld-ends DIN 3239 Form C.
Test pressures: 96 bar.

Strainer PN 160 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 240 Bar
Strainer PN 160 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 240 Bar Image

Materials:
Body: cast steel GP 240GH).
Screen: stainless steel 1.4301.
Gasket: graphit reinforced.
Connection: butt-weld-ends DIN 3239 Form C.
Test pressures: 240 bar.

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: bronze RG 5
Screen: stainless steel 1.4301
Connection: flanged ends DIN
Test pressures: 24 bar

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2, 24 bar
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2, 24 bar Image

Materials:
Body: cast iron JL 1040,DN 350/400 GGG 50 (ENG-GJS-500-7),
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301),
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 24 bar
Specials: Valves made of cast iron are not authorized for use in systems subject TRD110.

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: cast iron JL 1040
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301)
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 24 bar
Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns. Valves made of cast iron are not authorized for use in systems subject TRD110.

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: nodular cast iron JS 1030
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301)
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 24 bar

Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: nodular cast iron JS 1030
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301)
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 37,5 bar

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: nodular cast iron JS 1030
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301)
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 24 bar
Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.

Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: nodular cast iron JS 1030
Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 37,5 bar
Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.

Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: GS-C 25, Screen: stainless steel 1.4301
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 60 bar

Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: GS-C 25, Screen: stainless steel 1.4301
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 60 bar
Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.

Strainer PN 100, Y-type with welded flanges and drain-plug in cover, 205 bar
Strainer PN 100, Y-type with welded flanges and drain-plug in cover, 205 bar Image

Materials:
Body and flanges: forged steel C22
Screen: perforated plate Stainless steel 1.4301
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 205 bar

PN 10 Y-type welded construction, with flanged ends and drain-plug 1/2
PN 10 Y-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H, Cover: P265GH
Flanges: G235JRG2
Screen: stainless steel 1.4301
Gasket: graphite reinforced
Connection: flanged ends EN 1092-1
Test pressures: 15 bar

PN 16 Y-type welded construction, with flanged ends and drain-plug 1/2
PN 16 Y-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H
Cover: P265GH
Flanges: G235JRG2
Screen: stainless steel 1.4301
Gasket: graphite reinforced
Connection: flanged ends EN 1092-1
Test pressures: 24 bar

PN 25 Y-type welded construction, with flanged ends and drain-plug 1/2
PN 25 Y-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H
Cover: P265GH
Flanges: G235JRG2
Screen: stainless steel 1.4301
Gasket: graphite reinforced
Connection: flanged ends EN 1092-1
Test pressures: 37,5 bar

PN 40 Y-type welded construction, with flanged ends and drain-plug 1/2
PN 40 Y-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H
Cover: P265GH
Flanges: G235JRG2
Screen: stainless steel 1.4301
Gasket: graphite reinforced
Connection: flanged ends EN 1092-1
Test pressures: 60 bar

Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: stainless steel 1.4408
Screen: stainless steel AISI 316
Gasket: PTFE, screws A2-70
Connection: flanged ends DIN
Test pressures: 24 bar

PN 40 Y-type, with flanged ends and drain-plug 1/2
PN 40 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: stainless steel 1.4408
Screen: stainless steel AISI 316
Gasket: graphit reinforced
Connection: flanged ends DIN
Test pressures: 60 bar

Strainer PN 63 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 63 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: CrMo55
Screen: stainless steel 1.4301
Connection: flanged ends DIN
Test pressures: 96 bar

Strainer PN 100 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 100 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: CrMo55
Screen: stainless steel 1.4301
Connection: flanged ends DIN
Test pressures: 205 bar

Strainer PN 160 Y-type, with flanged ends and drain-plug 1/2
Strainer PN 160 Y-type, with flanged ends and drain-plug 1/2 Image

Materials:
Body: CrMo55
Screen: stainless steel 1.4301
Connection: flanged ends DIN
Test pressures: 240 bar

PN 10 T-type welded construction, with flanged ends and drain-plug 1/2
PN 10 T-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H
Cover: P265GH
Flanges: G235JRG2
Screen: stainless steel 1.4301
Gasket: graphite reinforced
Connection: flanged ends EN 1092-1
Test pressures: 15 bar

PN 16 T-type welded construction, with flanged ends and drain-plug 1/2
PN 16 T-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H.
Cover: P265GH.
Flanges: G235JRG2.
Screen: stainless steel 1.4301.
Gasket: graphite reinforced.
Connection: flanged ends EN 1092-1.
Test pressures: 24 bar.

PN 25 T-type welded construction, with flanged ends and drain-plug 1/2
PN 25 T-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H.
Cover: P265GH.
Flanges: G235JRG2.
Screen: stainless steel 1.4301.
Gasket: graphite reinforced.
Connection: flanged ends EN 1092-1.
Test pressures: 37,5 bar.

PN 40 T-type welded construction, with flanged ends and drain-plug 1/2
PN 40 T-type welded construction, with flanged ends and drain-plug 1/2 Image

Materials:
Body: S355J2H.
Cover: P265GH.
Flanges: G235JRG2 o.ä.
Screen: stainless steel 1.4301.
Gasket: graphite reinforced.
Connection: flanged ends EN 1092-1.
Test pressures: 60 bar.

Mudbox flanged ends PN 10/16 Straight model max. working pressure 4 bar
Mudbox flanged ends PN 10/16 Straight model max. working pressure 4 bar Image

Materials:
Body: cast iron JL 1040.
Screen: stainless steel 1.4301.
Connection: flanged ends DIN.
Test pressures: 4 bar.

Mono-in-line-Strainer PN 16
Mono-in-line-Strainer PN 16 Image

Size: 1” to 12” nominal bore
Pressure: EN 1092-1 PN 16
Features: – Integrally Cast Housing – Quick Release Closure – Red oxide finish as standard – 0.40 mm mesh screen as standard – integral feet on 6” and over
Options: – Special gasket, special basket – D. P. Tappings/Gauge – Magnetic Basket Insert – Flanged Drains/Drain Valves – Special Finish/Linings

150 lbs Rating Duplex-Strainer
150 lbs Rating Duplex-Strainer Image

Sizes: ½” to 4”nominal bore
Pressure: ANSI Class 150 lbs
Features: – Simple change-over operation – Linked ball valve mechanism for positive seal – Red oxide finish (carbon steel) – 40 mesh baskets as standard
Options: – Special baskets – Magnetic basket inserts – Flanged Drains/Vents – Special Finish – Other materials/ratings available

Key for our datasheets
Smutsfilter
Strainer PN 20, Y-type with screwed ends and drain plug, 30 Bar Image
Strainer PN 20, Y-type with screwed ends and drain plug, 30 Bar
Materials: Body: brass MS 58 Screen: stainless steel 1.4301 Connection: screwed ends DIN 259 Test pressures: 30 bar Specials: Brass fittings are not approved for use in drinking water installations!
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar Image
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar
Materials: Body: forged steel A 105N, Screen: stainless steel AISI 316 Gasket: graphit reinforced Connection: screwed ends BSP Test pressures: 205 bar
Strainer PN 40 Y-type, with screwed ends, 60 Bar Image
Strainer PN 40 Y-type, with screwed ends, 60 Bar
Materials: Body:stainless steel 1.4408, Screen: stainless steel perforated plate 1.4408 Gasket: PTFE Connection: screwed ends BSP Test pressures: 60 bar
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar Image
Strainer 800 lbs Y-type, screwed ends and drain-plug 1/2″ in cover, 205 Bar
Materials: Body: stainless steel AISI 316. Screen: stainless steel AISI 316. Gasket: graphite reinforced. Connection: screwed ends BSP. Test pressures: 205 bar.
Strainer PN 63 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 96 Bar Image
Strainer PN 63 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 96 Bar
Materials: Body: cast steel GP 240GH). Screen: stainless steel 1.4301. Gasket: graphit reinforced. Connection: butt-weld-ends DIN 3239 Form C. Test pressures: 96 bar.
Strainer PN 160 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 240 Bar Image
Strainer PN 160 Y-type, butt-weld-ends and drain-plug 1/2″ in cover, 240 Bar
Materials: Body: cast steel GP 240GH). Screen: stainless steel 1.4301. Gasket: graphit reinforced. Connection: butt-weld-ends DIN 3239 Form C. Test pressures: 240 bar.
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: bronze RG 5 Screen: stainless steel 1.4301 Connection: flanged ends DIN Test pressures: 24 bar
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2, 24 bar Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2, 24 bar
Materials: Body: cast iron JL 1040,DN 350/400 GGG 50 (ENG-GJS-500-7), Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301), Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 24 bar Specials: Valves made of cast iron are not authorized for use in systems subject TRD110.
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: cast iron JL 1040 Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301) Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 24 bar Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns. Valves made of cast iron are not authorized for use in systems subject TRD110.
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: nodular cast iron JS 1030 Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301) Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 24 bar
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: nodular cast iron JS 1030 Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301) Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 37,5 bar
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: nodular cast iron JS 1030 Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301) Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 24 bar Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: nodular cast iron JS 1030 Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301 Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 37,5 bar Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: GS-C 25, Screen: stainless steel 1.4301 Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 60 bar
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 25/40 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: GS-C 25, Screen: stainless steel 1.4301 Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 60 bar Specials: Epoxy paint (wet)inside + outside RAL 5005, 100-150 microns.
Strainer PN 100, Y-type with welded flanges and drain-plug in cover, 205 bar Image
Strainer PN 100, Y-type with welded flanges and drain-plug in cover, 205 bar
Materials: Body and flanges: forged steel C22 Screen: perforated plate Stainless steel 1.4301 Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 205 bar
PN 10 Y-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 10 Y-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H, Cover: P265GH Flanges: G235JRG2 Screen: stainless steel 1.4301 Gasket: graphite reinforced Connection: flanged ends EN 1092-1 Test pressures: 15 bar
PN 16 Y-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 16 Y-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H Cover: P265GH Flanges: G235JRG2 Screen: stainless steel 1.4301 Gasket: graphite reinforced Connection: flanged ends EN 1092-1 Test pressures: 24 bar
PN 25 Y-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 25 Y-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H Cover: P265GH Flanges: G235JRG2 Screen: stainless steel 1.4301 Gasket: graphite reinforced Connection: flanged ends EN 1092-1 Test pressures: 37,5 bar
PN 40 Y-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 40 Y-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H Cover: P265GH Flanges: G235JRG2 Screen: stainless steel 1.4301 Gasket: graphite reinforced Connection: flanged ends EN 1092-1 Test pressures: 60 bar
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: stainless steel 1.4408 Screen: stainless steel AISI 316 Gasket: PTFE, screws A2-70 Connection: flanged ends DIN Test pressures: 24 bar
PN 40 Y-type, with flanged ends and drain-plug 1/2 Image
PN 40 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: stainless steel 1.4408 Screen: stainless steel AISI 316 Gasket: graphit reinforced Connection: flanged ends DIN Test pressures: 60 bar
Strainer PN 63 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 63 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: CrMo55 Screen: stainless steel 1.4301 Connection: flanged ends DIN Test pressures: 96 bar
Strainer PN 100 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 100 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: CrMo55 Screen: stainless steel 1.4301 Connection: flanged ends DIN Test pressures: 205 bar
Strainer PN 160 Y-type, with flanged ends and drain-plug 1/2 Image
Strainer PN 160 Y-type, with flanged ends and drain-plug 1/2
Materials: Body: CrMo55 Screen: stainless steel 1.4301 Connection: flanged ends DIN Test pressures: 240 bar
PN 10 T-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 10 T-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H Cover: P265GH Flanges: G235JRG2 Screen: stainless steel 1.4301 Gasket: graphite reinforced Connection: flanged ends EN 1092-1 Test pressures: 15 bar
PN 16 T-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 16 T-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H. Cover: P265GH. Flanges: G235JRG2. Screen: stainless steel 1.4301. Gasket: graphite reinforced. Connection: flanged ends EN 1092-1. Test pressures: 24 bar.
PN 25 T-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 25 T-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H. Cover: P265GH. Flanges: G235JRG2. Screen: stainless steel 1.4301. Gasket: graphite reinforced. Connection: flanged ends EN 1092-1. Test pressures: 37,5 bar.
PN 40 T-type welded construction, with flanged ends and drain-plug 1/2 Image
PN 40 T-type welded construction, with flanged ends and drain-plug 1/2
Materials: Body: S355J2H. Cover: P265GH. Flanges: G235JRG2 o.ä. Screen: stainless steel 1.4301. Gasket: graphite reinforced. Connection: flanged ends EN 1092-1. Test pressures: 60 bar.
Mudbox flanged ends PN 10/16 Straight model max. working pressure 4 bar Image
Mudbox flanged ends PN 10/16 Straight model max. working pressure 4 bar
Materials: Body: cast iron JL 1040. Screen: stainless steel 1.4301. Connection: flanged ends DIN. Test pressures: 4 bar.
Mono-in-line-Strainer PN 16 Image
Mono-in-line-Strainer PN 16
Size: 1” to 12” nominal bore Pressure: EN 1092-1 PN 16 Features: – Integrally Cast Housing – Quick Release Closure – Red oxide finish as standard – 0.40 mm mesh screen as standard – integral feet on 6” and over Options: – Special gasket, special basket – D. P. Tappings/Gauge – Magnetic Basket Insert – Flanged Drains/Drain Valves – Special Finish/Linings
150 lbs Rating Duplex-Strainer Image
150 lbs Rating Duplex-Strainer
Sizes: ½” to 4”nominal bore Pressure: ANSI Class 150 lbs Features: – Simple change-over operation – Linked ball valve mechanism for positive seal – Red oxide finish (carbon steel) – 40 mesh baskets as standard Options: – Special baskets – Magnetic basket inserts – Flanged Drains/Vents – Special Finish – Other materials/ratings available