Sort By
Produkt Val
Kulventiler
3-piece Ball Valves Type A20D/AF20D / DN08 – DN150 / ¼″ – 6″ 3-piece Ball Valve series A20D/AF20D, PN25/64/100/PN125, full or reduced bore, soft seated, floating ball, TA-Luft and SIL3 tested. antistatic device with ISO-mounting pad for direct mounting of pneumatic or electric actuators. With locking device. Optionally in Fire-Safe design acc. ISO10497/API607. Ends available with butt weld Sch40S or ISO1127-1, threaded ends for BSPP or NPT, socket weld ends and male threaded ends. With locking device. Optionally in Fire-Safe design acc. ISO10497/API607. Ends available with butt weld Sch40S or ISO1127-1, threaded ends for BSPP or NPT, socket weld ends and male threaded ends. Specials on request. Standards on stock. Overview Nominal pressure: PN25 / PN64 / PN100 / PN125 Body material: Carbon steel 1.0619 Stainless steel 1.4408 Connection ends: BW Sch40S/ISO, SW, BSPP, NPT a.o. Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request Others: Standard on stock
Flanged Ball Valve Type AF90D / DN15 – DN100 2-piece DIN-Flanged Ball Valve long pattern, full bore. With double seal system, floating ball, Fire-Safe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Flange for direct mounting for Actuator. With locking device. Standards on stock. Overview Nominal pressure: PN16/40 Face to face: acc. EN558 Row 1 Body material: Carbon steel 1.0619 Stainless steel 1.4408 Connection ends: DIN-Flansche to EN 1092-1 Form B1 Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request Specials: Double seal -and pressure relieving system Others: Other flange facings on request
Flanged Ball Valve Type AF94D / DN15 – DN150 2-piece DIN-Flanged Ball Valve short pattern, full bore, floating ball, with double seal system FireSafe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Top flange for direct mounting for Actuator. With locking device. Standards on stock. With locking device. Standards on stock. Overview Nominal pressure: PN16/40 Face to face: acc. EN558 series 27 Body material: Carbon steel 1.0619 Stainless steel 1.4408 Connection ends: DIN-Flansche to EN 1092-1 Form B1 Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request Specials: Double seal -and pressure relieving system Others: Other flange facings on request
Wafer Ball Valves Type AF80D / DN15 – DN150 Wafer type AF80D ball valve with full bore, floating ball, with ISO mounting pad for direct mounting of pneumatic or electrical actuator. FireSafe acc. ISO 10497 / API607, TA-Luft and SIL 2 approved, antistatic device. Hand lever with locking device. Overview Nominal pressure: PN16/40 Body material: Stainless steel 1.4408 Carbon steel on request Connection: between DIN-Flanges acc. to EN 1092-1 Form B1 Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK©, others on request
3-piece Ball Valves Type JBSM / DN15 – DN50 / ½″ – 2″ 3-piece metal seated ball valve, full bore, floating ball, antistatic device with ISO-mounting pad for mounting of pneumatic or electric actuators. With locking device. Overview Nominal pressure: ASME cl. 600 / PN100 600 / PN100 Body material: Carbon steel 1.0619 / A216 WCB Stainless steel 1.4408 / CF8M Connection ends: BW, SW, BSP, NPT a.o. Sealing system: metal seated Stellite© or Tungsten carbide, others on request Others: Standard on stock
Segment control valves Type JSB / DN25 – DN500 / 1″ – 20″, JDV Control Valves© 1-piece Trunnion Design DIN PN16/40, or ANSI class150/300, in wafer and flanged design, for Control- or Shut off – applications, soft- and metal seated Design, with ISO mounting pad acc. to ISO5211, Antistatic, Face to Face dimensions acc. to ISA S75.04/EN558 series 36, For applications up to 350°C. Overview Design: as wafer or flanged design Sizes: DN25 – DN500 / 1″ – 20″ Pressure class: PN16/40, ANSI cl.150/300 Body material: Carbon steel 1.0619 / A216 WCB Stainless steel 1.4408/A351 CF8M Seat material: soft- and metal seated
Flanged Ball ValveType JBFM / DN15 – DN250 / ½″ – 10″ 2-pieces metal seated DIN-/ANSI Flange Ball Valve PN16/40, PN100 on request. ANSI class150, 300 and 600. DIN-Face to face dimension acc. EN558, row 27 or ANSI-dimensions acc. ASME B16.10, full port, floating ball, FireSafe acc. nach ISO 10497 certified. Antistatic, with ISO connection for Actuator mounting kit. With locking device. Different body materials and designs available for applications up to 500 ° C. Overview Pressure nominal: PN16/40/100, ANSI cl.150,300,600 Face to Face: acc. EN558 row 27, ASME B16.10 Body material: Carbon steel 1.0619/A216 WCB Stainless steel 1.4408/ A351 CF8M Connections: Flanges DIN/ANSI acc. to EN 1092-1 form B1 or ANSI B16.5 RF Sealing system: metal seated Stellite© or Tungsten carbide, others on request
Application Ball valve: is isolating valve designed to fully open or close the service fluid flow. It is not designed to be used for throttling or regulating purposes. For temperatures up to +500 °C (for temperatures above +400 °C for non-oxidizing fluids only). Suitable for water, steam, gas, oil, heat transfer fluids and other liquids and gases without mechanical impurities. Approved for fluids in groups 1 (hazardous) and 2 according to 2014/68/EU. Production range DN 10 – DN 100, PN 16 – PN 160 NPS ½″ – NPS 4″, Class 150 – Class 900 Characteristics floating ball, full bore, anti-static design, stem secured against release (anti-blow-out), stuffing box, sealed with Graphite. Operation hand lever, hand wheel with worm gear, pneumatic actuator, electric actuator. Connection to piping internal thread (KM 9101.X-HT) – G (BSPP), NPT, R (BSPT), Rp weld end (KM 9103.X-HT) – butt or socket flanged (KM 9108.X-HT) – EN, API, GOST
Kulventiler
3-piece Ball Valves Type A20D/AF20D / DN08 – DN150 / ¼″ – 6″ 3-piece Ball Valve series A20D/AF20D, PN25/64/100/PN125, full or reduced bore, soft seated, floating ball, TA-Luft and SIL3 tested. antistatic device with ISO-mounting pad for direct mounting of pneumatic or electric actuators. With locking device. Optionally in Fire-Safe design acc. ISO10497/API607. Ends available with butt weld Sch40S or ISO1127-1, threaded ends for BSPP or NPT, socket weld ends and male threaded ends. With Read More
Flanged Ball Valve Type AF90D / DN15 – DN100 2-piece DIN-Flanged Ball Valve long pattern, full bore. With double seal system, floating ball, Fire-Safe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Flange for direct mounting for Actuator. With locking device. Standards on stock. Overview Nominal pressure: PN16/40 Face to face: acc. EN558 Row 1 Body material: Carbon steel 1.0619 Stainless steel 1.4408 Connection ends: DIN-Flan Read More
Flanged Ball Valve Type AF94D / DN15 – DN150 2-piece DIN-Flanged Ball Valve short pattern, full bore, floating ball, with double seal system FireSafe acc. to ISO 10497 / API607, TA-Luft and SIL 3 tested and FDA compliant. Antistatic, incl. Safety Relief System, ISO Top flange for direct mounting for Actuator. With locking device. Standards on stock. With locking device. Standards on stock. Overview Nominal pressure: PN16/40 Face to face: acc. EN558 series 27 Body material: Carbon steel 1.0619 Read More
Wafer Ball Valves Type AF80D / DN15 – DN150 Wafer type AF80D ball valve with full bore, floating ball, with ISO mounting pad for direct mounting of pneumatic or electrical actuator. FireSafe acc. ISO 10497 / API607, TA-Luft and SIL 2 approved, antistatic device. Hand lever with locking device. Overview Nominal pressure: PN16/40 Body material: Stainless steel 1.4408 Carbon steel on request Connection: between DIN-Flanges acc. to EN 1092-1 Form B1 Seat materials: PTFE, RPTFE, CPTFE, TFM©, PEEK Read More
3-piece Ball Valves Type JBSM / DN15 – DN50 / ½″ – 2″ 3-piece metal seated ball valve, full bore, floating ball, antistatic device with ISO-mounting pad for mounting of pneumatic or electric actuators. With locking device. Overview Nominal pressure: ASME cl. 600 / PN100 600 / PN100 Body material: Carbon steel 1.0619 / A216 WCB Stainless steel 1.4408 / CF8M Connection ends: BW, SW, BSP, NPT a.o. Sealing system: metal seated Stellite© or Tungsten carbide, others on request Others: Standa Read More
Segment control valves Type JSB / DN25 – DN500 / 1″ – 20″, JDV Control Valves© 1-piece Trunnion Design DIN PN16/40, or ANSI class150/300, in wafer and flanged design, for Control- or Shut off – applications, soft- and metal seated Design, with ISO mounting pad acc. to ISO5211, Antistatic, Face to Face dimensions acc. to ISA S75.04/EN558 series 36, For applications up to 350°C. Overview Design: as wafer or flanged design Sizes: DN25 – DN500 / 1″ – 20″ Pressure class: PN16/40, Read More
Flanged Ball ValveType JBFM / DN15 – DN250 / ½″ – 10″ 2-pieces metal seated DIN-/ANSI Flange Ball Valve PN16/40, PN100 on request. ANSI class150, 300 and 600. DIN-Face to face dimension acc. EN558, row 27 or ANSI-dimensions acc. ASME B16.10, full port, floating ball, FireSafe acc. nach ISO 10497 certified. Antistatic, with ISO connection for Actuator mounting kit. With locking device. Different body materials and designs available for applications up to 500 ° C. Overview Pressure nomin Read More
Application Ball valve: is isolating valve designed to fully open or close the service fluid flow. It is not designed to be used for throttling or regulating purposes. For temperatures up to +500 °C (for temperatures above +400 °C for non-oxidizing fluids only). Suitable for water, steam, gas, oil, heat transfer fluids and other liquids and gases without mechanical impurities. Approved for fluids in groups 1 (hazardous) and 2 according to 2014/68/EU. Production range DN 10 – DN 100, PN 16 Read More