by Mats Mats

FLT 17LC flottör- och termostatiska ångfällor 1/2″ och 3/4″ – DN 15 och DN 20

FLT17LC

FLT17LC flottör och termostatiska (integrerad luftventil) ångfällor
serier är designade för alla typer av låg- och högtrycksånga
värme- och processutrustning.
Typiska applikationer inkluderar enhetsvärmare, värmeväxlare, torkare,
mantlade kärl och alla applikationer där kontinuerlig dränering
är väsentligt.

Material: SG iron.
Storlekar: 1/2″ och 3/4″, DN 15 och 20.
Anslutning: Invändig gängad ISO 7 RP eller NPT.
Max. Arbetstryck: FLT17LC-4,5 – 4,5 bar,
FLT17LC-10 – 10 bar, FLT17LC-14 – 14 bar

by Mats Mats

IB30S är en robusta skopångfälla. 1/2″ till 1″

IB30S
IB30S är en robusta och mångsidiga inverterade skopångfälla tillverkade i carbon steel.
Dessa ångfällor fungerar i drift periodvis och är lämpliga för användning med mättad eller överhettad ånga.
Typiska applikationer inkluderar dropppunkter, ångspårningsledningar, torktumlare, kemisk och tvättutrustning.

MATERIAL: carbon steel
STORLEKAR: 1/2″ till 1″
ANSLUTNINGAR:
Innergängad ISO 7 RP- eller NPT-sockelsvets
(SW) ASME 16.11
MAX. ARBETSTRYCK: 17 bar
DRIFTSTEMPERATUR: 300 ºC
FLÖDESHASTIGHET KAPACITET:
Upp till 530 kg/h

by Mats Mats

DSH, Material: Stainless steel DN 1/2”, 1” – 11/4”

DSH
The ADCA DSH series of direct steam injection humidifiers are designed to ensure highly
efficient and moisture free steam injection in air ducts and AHU for humidification purposes.
These units are completely manufactured from corrosion resistant stainless steel,
and are available as plug and play packaged solutions or alternatively as individual
components to be incorporated into humidification systems.

MATERIAL: Stainless steel
SIZES: 1/2”, 1” and 11/4”
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged and special connections on request

by Mats Mats

SC332- SC532 Material Stainless steel body and coil

SC332-SC532
The ADCA sample coolers were specially designed to cool samples of boiler water or steam for analysis.
Sample coolers prevent steam flashing-off from hot pressurised liquid samples, which can be
dangerous and may result in an incorrect sample. This device may be used for boiler water
analysis and other sampling or cooling applications compatible with the construction materials.

MATERIAL: Stainless steel body and coil
SIZES AND CONNECTIONS:
Cooling water inlet/outlet: 1/2” or 3/4” (BSP or NPT)
Sample tube inlet/outlet: 10 mm O/D
MAX. OPERATING PRESSURE: 20 bar / 280 bar
MAX. RELATED TEMPERATURE: 550 ºC

by Mats Mats

SC32B- SC132B Material Stainless steel body and coil

SC32B-SC132B
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis.
Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be
dangerous and may result in an incorrect sample. This device may be used for boiler water analysis
and other sampling or cooling applications compatible with the construction materials.

MATERIAL: Stainless steel body and coil
SIZES AND CONNECTIONS:
Cooling water body inlet 1/2”, outlet 1/2” (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D
MAX. OPERATING PRESSURE: 20 bar / 110 bar
MAX. RELATED TEMPERATURE:
120 ºC / 450 ºC

by Mats Mats

SC32F- SC132F, Material Stainless steel body and coil

SC32F-SC132F
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis.
Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous
and may result in an incorrect water sample. This device may be used for boiler water analysis
and other sampling or cooling applications compatible with the construction materials.

MATERIAL: Stainless steel body and coil
SIZES AND CONNECTIONS:
Cooling water body inlet 1/2”, outlet 3/4” (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D
MAX. OPERATING PRESSURE: 20 bar / 110 bar
MAX. RELATED TEMPERATURE: 120 ºC / 450 ºC

by Mats Mats

SC32-SC132 Material, Stainless steel body and coil

SC32-SC132
The ADCA sample coolers are specially designed to cool samples of boiler water or steam for analysis.
Sample coolers prevent steam flashing-off from hot pressurized liquid samples, which can be dangerous
and may result in an incorrect sample. This device may be used for boiler water analysis and
other sampling or cooling applications compatible with the construction materials.

MATERIAL: Stainless steel body and coil
SIZES AND CONNECTIONS:
Cooling water inlet/outlet: 1/2” on body (BSP or NPT)
Sample tube inlet/outlet: 8 mm O/D
MAX. OPERATING PRESSURE: 20 bar / 110 bar
MAX. RELATED TEMPERATURE: 120 ºC / 450 ºC

by Mats Mats

FLT25, SG iron SIZES 1”, DN 25

FLT25
The FLT25 is a series of float and thermostatic steam traps with integral air vent designed
for modulating discharge of condensate, ensuring maximum system heat transfer. Typical
applications include unit heaters, heat exchangers, dryers, jacketed vessels and other
applications where continuous discharge is essential.

MATERIAL: SG iron
SIZES: 1” ; DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 2490 kg/h

by Mats Mats

FLT21, SG iron SIZES 1/2”-1”,DN15 -DN25

FLT21
The FLT21 is a series of float and thermostatic steam traps with integral air vent designed for
modulating discharge of condensate, ensuring maximum system heat transfer. Typical applications
include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where
continuous discharge is essential.

MATERIAL: SG iron
SIZES: 1/2” to 1” ; DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 710 kg/h

by Mats Mats

FLT20, SG iron SIZES 1/2”-1”,DN15 -DN25

FLT20
The FLT20 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge
of condensate, ensuring maximum system heat transfer. Typical applications include unit heaters, heat exchangers, dryers,
jacketed vessels and other applications where continuous discharge is essential.

MATERIAL: SG iron
SIZES: 1/2” to 1” ; DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42 Class 150
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 595 kg/h