by Mats Mats

BM90,Carbon steel sizes 1/2″-1″- DN 15-DN 25

BM90
The BM90 is a series of robust and efficient bimetallic steam traps and air vents. These steam traps are recommended
for steam process applications where sensible heat can be recovered, such as steam tracing lines, drip points, storage
tank coils and steam air venting. Specially designed for draining high pressure superheated steam lines and processes.

MATERIAL: Carbon steel
SIZES: 1/2″ to 1″ – DN 15 to DN 25
CONNECTIONS: Threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 250
Flanged ASME B16.5 Class 1500
Socket weld ASME B16.11
Butt weld ASME B16.25
MAX. OPERATING PRESSURE: 160 bar
MAX. OPERATING TEMPERATURE: 525 ºC
FLOW RATE CAPACITY: Up to 4500 kg/h

by Mats Mats

Kontinuerlig avsaltningsventil 560 DRM-1 EN ASME/FNPT

MOD. 560 DRM-1 ASME/FNPT
Effi cient monitoring of the purging of salts, dirt and sludge in a steam boiler requires regular
analysis of the water in order to verify that its parameters are within the ideal levels
af salinity and alkalinity demanded by law.
All the Continuous desalting valve (Mod. 560 and 560-A) are provided with taps for obtaining
samples. As the water is extracted continuously 30 ÷ 50 mm. below the minimum level,
the collection level is ideal and does not interfere with the control and level regulation devices.

Direct sampling is incorrect:

.Losses by expansion increase the density of the water and falsify results.
.There is an obvious physical risk involved.
The basic premise for conducting analyses correctly is to bring the samples from the tap of the Continuous
desalting valve to the Samples water-cooled DRM-1, and bring them down to between 24 ÷ 26°C.

by Mats Mats

Bottenblåsninsventil 460 EN

MOD. 460 EN
The water in the boiler contains salts, which are built up by the continuous evaporation. If these salts are not eliminated, bubbles and foam are formed when the density of the water increased.
To prevent these lime deposits forming, the water supply must be suitably treated, with the result that certain salts are changed producing impurities which form sludge and encrusted deposits which then adhere to the sides or the bottom of the boiler and to the combustion tubes, together with particles of dirt, remains of electrodes, carbonic acid, oxygen, etc.

This leads to a high level of rust which may:

.Destroy the metal plate of the boiler, causing high maintenance costs.
.Produce thermic voltages, causing cracks in the metal plate and soldering cord.
.Notably slow down thermic transmission, meaning an unnecessary and excessive consumption of fuel

by Mats Mats

IB36i Stainless steel 1/2”- 1”; Dn 15 – Dn 25

IB36i
The IB36i is a series of robust and versatile inverted bucket steam traps manufactured in stainless steel.
These steam traps operate intermittently, and are suitable for use with low to high pressure saturated
or superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical
and laundry equipment.

MATERIAL: Stainless steel
SIZES: 1/2” to 1”; DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
MAX. OPERATING TEMPERATURE: 400 ºC
FLOW RATE CAPACITY: Up to 610 kg/h

by Mats Mats

IB30SS Dn 15-Dn 25, 1/2”-1” Stainless steel

IB30SS | DN 15 – DN 25
The IB30SS is a series of general purpose robust and versatile inverted bucket steam traps manufactured in
stainless steel. These steam traps operate intermittently and are suitable for use with saturated or
superheated steam. Typical applications include drip points, steam tracing lines, dryers, chemical
and laundry equipment.

MATERIAL: Stainless steel
SIZES: 1/2” to 1”
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 17 bar
MAX. OPERATING TEMPERATURE: 400 ºC
FLOW RATE CAPACITY: Up to 530 kg/h

by Mats Mats

AE 50i Stainless steel 1/2”x1/2”- 1”x1/2”

AE50i
The AE50 range of automatic vents are designed to remove air or gases from water and other liquid systems,
without requiring any external source of energy. They are capable of handling significant loads during
start-up while still being able to discharge smaller loads in continuous modulating operation with one
single orifice. These ball float type vents are manufactured in stainless steel, available with soft
sealing, and can be used in combination with other air elimination and separation systems or
directly applied at high points in the pipelines.

MATERIAL: Stainless steel
SIZES: 1/2” x 1/2” to 1” x 1/2”, DN 15 x 1/2” to DN 25 x 1/2”
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
MAX. OPERATING PRESSURE: 30 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by Mats Mats

AE 30SS Stainless steel 1/2” and 3/4”

AE30SS
The AE30SS all stainless steel sealed body air eliminator remove air from hot and superheated
water systems and is also suitable for all liquids compatible with the construction, providing
that their specific weight is not less than 0,75 kg/L. This ball float type automatic air
eliminator can be used in combination with other air elimination and separation systems or
directly applied at high points in the piping.

MATERIAL: Stainless steel
SIZES: 1/2” and 3/4”
CONNECTIONS: Female threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE: 30 bar
MAX. OPERATING TEMPERATURE: 300 ºC

by Mats Mats

AE 16SS Stainless steel 1/2” and 3/4”

AE16SS
The AE16SS all stainless steel air eliminator removes air from HVAC systems and is also suitable
for non-corrosive and/or dangerous liquids compatible with the construction, providing that their
specific weight is no less than 0,75 kg/dm³. This ball float type automatic air eliminator can be
used in combination with other air elimination and separation systems or directly applied at
high points in the piping.

MATERIAL: Stainless steel
SIZES: 1/2” and 3/4”
CONNECTIONS: Female threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: Up to 150 ºC

by Mats Mats

AE 50S Carbon steel 1/2”x1/2” – 1”x1/2”

AE50S
The AE50 range of automatic vents are designed to remove air or gases from water and other liquid systems,
without requiring any external source of energy. They are capable of handling significant loads during start-up
while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

MATERIAL: Carbon steel
SIZES: 1/2” x 1/2” to 1” x 1/2”, DN 15 x 1/2” to DN 25 x 1/2”
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
MAX. OPERATING PRESSURE: 30 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by Mats Mats

FA 16 SS Stainless steel 1/2”- 3/4”

FA16SS
The FA16SS series are fully automatic ball float traps, extremely compact in dimension and light in weight, specially designed for draining water from compressed air lines. Usual applications include aftercoolers, separators and compressed air mains.

MATERIAL: Stainless steel
SIZES: 1/2” and 3/4”
CONNECTIONS: Threaded ISO 7 Rp or NPT
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: 180 ºC