ADCATrol V16/2 är en serie ensitsiga, tvåvägs klotreglerventiler konstruerade för enkel processteknik
och industriella applikationer med icke-kritiska driftsförhållanden. Dessa ventiler kan monteras med
pneumatiska, hydrauliska eller elektriska ställdon för modulerande och avstängningskontrolluppgifter.
MATERIAL: SG-järn, kolstål och rostfritt stål
STORLEKAR: DN 15 till DN 100
ANSLUTNINGAR:
FLÄNSAD EN 1092-2 PN 16
FLÄNSAD EN 1092-1 PN 16 eller PN 40
FLÖDESKOEFFICIENTER: KVS 2,1 – 160
VPA26/2
The VPA26/2 blowdown valve series was specially designed for application on steam boilers, to remove sludge sediments that naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. This valve is available with a diaphragm actuator and/or manual operation lever.
MATERIAL: Carbon steel or stainless steel
SIZES: 3/4” to 2” – DN 20 to DN 50
CONNECTIONS:
Flanged EN PN 40
Flanged ASME Class 300
FLOW RATE COEFFICIENTS: Kvs 6,3 or 16
UD-720
The UD-720 is a programmable digital panel display used for the measurement of standard sensor and analog signals applied in automation. It is ideally suited for use with our range of instrumentation such as pressure transmitters, temperature probes and TDS controllers.
SUPPLY VOLTAGES:
24 V AC/DC
85 to 253 V AC/DC
DIMENSIONS: 93 x 96 x 48 mm
IP RATING: IP 65
COMMUNICATION PROTOCOL: MODBUS RTU
UC-820
The UC-820 is a digital universal controller used in the automation of industrial processes. It is ideally suited for use with our range of instrumentation, electric and pneumatic control valves and other electrical equipment.
SUPPLY VOLTAGES:
20 to 40 V AC/DC
85 to 253 V AC/DC
DIMENSIONS: 101 x 48 x 96 mm
IP RATING: IP 65
COMMUNICATION PROTOCOL: MODBUS RTU
PE986
The ADCATrol PE986 positioner requires an input signal of 4÷20 mA for the proportional control actuator. The positioner compares the output signal from a controller with the position feedback and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential pressure.
IP RATING: IP 54 (IP 65 on request)
AVAILABLE APPROVALS: ATEX
COMMUNICATION: 4 to 20 mA
OPERATING TEMPERATURE: -40 to 80 ºC
Rotary Control Valve with tight shut-off and high grade rubber seat ring. The 508V ensures tight shut-off and eliminates the need for any additional stop valve that is normally required by conventional control valves.
Size Range: DN50 – DN600 (2″ – 24″)
Pressure Rating: 10 bar
Body Patterns: Wafer Body Seat:EPDM, NBR
Body Materials: Carbon Steel
Disc Materials:304SS, 316SS
Temperature Rating: -20°C to +120°C
Rotary Control Valve for high temperature fluids up to 400°C.Designed exclusively for the regulation of fluids, the 507V Control Butterfly Valve range provides:
High rangeability Reduced dynamic torque
Low noise levels. Anti-cavitation Wide temperature range.
Size Range:DN50 – DN400 (2″ – 16″)
Pressure Rating:Class 150, Class 300
Body Patterns: Wafer Body Seat:None
Body Materials:WCB, 316SS
Disc Materials: WCB, 316SS
Temperature Rating: -50°C to +400°C
