by Mats Mats

Minimatic reglerventil on/off

Body Styles
MINIMATIC valves are available with cast bronze bodies with end connections 1/2″ to 2″ BSPT or with flanges 15mm to 40mm PN16 for pressures up to 16 bar and 180°C.
For aggressive chemical applications investment cast 316 stainless steel bodies 1/2″, 3/4″, 1″ are available for services up to 25 bar and 180°C.

Gland Sealing
All MINIMATIC control valves incorporate our new “Low Fugitive Emission” maintenance free gland seals incorporating a modified spring loaded ptfe chevron ring set and new temperature compensated, split guide bushes widely spaced at the base of the gland and with the upper bush retained in the gland nut. These self-adjusting maintenance free glands result in improved sealing and extended periods between major overhauls.

Body material                         Gunmetal    Stainless Steel
Maximum working pressure    16 bar g            25 bar g
Maximum temperature             180°C               180°C
Saturated steam                          9 bar g             9 bar g
Maximum actuator pressure    4 bar g             4 bar g
Trim material                              PTFE               PTFE

by Mats Mats

Bossmatic reglerventil 2400 Series

2400 Series Bossmatic control valves

areintended for general utility service in pressure, flow and
temperature control applications for the textile,
pharmaceutical, semiconductor and industrial Heating,
Ventilation & Air Conditioning markets.
This compact control valve series is positioned to take
advantage of the trend toward industrial grade
requirements in a range of applications spanning from
general utility and special applications. Industrial
grade control valves exhibit low hysteresis and
deadband, good control characteristics, tight shutoff,
rugged construction, high performance packing and
easy maintainability that translates into reduced longterm operating costs.

by Mats Mats

Bossmatic Paragon 600 serien

Data Sheets
BODY MATERIAL: Cast iron -BS 1452-GR 250 Cast steel -BS 1504-161-GR 480A Stainless steel -BS 1504-316C16

TRIM MATERIAL: Stainless steel, stellite and PTFE.

FLANGES: PN16/25/40. (ANSI125/250, 150/300)

MAX AMBIENT TEMPERATURE: 90° C.

MAX SERVICE TEMPERATURE: According to body material and flange rating.

MAX DIRECT AIR SUPPLY: 6 bar.

SEAT TIGHTNESS: Metal-to-metal seats conform to ANSI B16 104 Class 4 shut off. Soft inserts conform to ANSI B16 104 Class 5 shut off.

ACCESSORIES: Valve Positioner. E/P Converter. 3-way Solenoid Valve. Soft Seat. Hand Jack. Air Filter Regulator. Temperature, Pressure and Level Controllers. End of Travel Limit Switches, Bellows Seal.

ELECTRIC ACTUATORS: Details available on request.

by Mats Mats

TZIDC, IP 65 (IP 66 on request) NEMA 4X

TZIDC
The ADCATrol TZIDC is an electronically configurable positioner with communication capabilities designed for mounting to pneumatic linear or rotary actuators. It features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and optimal control behavior.

IP RATING: IP 65 (IP 66 on request) NEMA 4X
AVAILABLE APPROVALS: ATEX, SIL3, FM, CSA, GOST and IECEx
COMMUNICATION:
4 to 20 mA,
HART, Profibus PA or
FOUNDATION Fieldbus-H1
OPERATING TEMPERATURE: -40 to 85 ºC

by Mats Mats

PP981, IP 54 (IP 65 on request) AVAILABLE APPROVALS ATEX

PP981
The ADCATROL PP 981 positioner requires an input signal of 0,2÷1bar (3÷15psi) for the proportional control actuator. The positioner compares the output signal from a controller with the position feedback and varies a pneumatic output signal to the actuator accordingly. The actuator position is therefore guaranteed for any controller output signal and the effects of varying differential pressure.

IP RATING: IP 54 (IP 65 on request)
AVAILABLE APPROVALS: ATEX
COMMUNICATION: 0,2 to 1 bar (3 to 15 psi)
OPERATING TEMPERATURE: -40 to 80 ºC

by Mats Mats

PI991,IP 66 NEMA 4X AVAILABLE APPROVALS ATEX, SIL3, FM, CSA and IECEx

PI991
The microprocessor-controlled positioner PI991 is designed to control pneumatic valve actuators and can be operated locally or by means of control systems. The advanced diagnostic can be partially shown on the local LCD of the positioner or fully on a PC or a DCS workstation with a DTM based software (VALcare or Valve Monitor). The positioner is available with different communication protocols.

IP RATING: IP 66 NEMA 4X
AVAILABLE APPROVALS: ATEX, SIL3, FM, CSA and IECEx
COMMUNICATION: 4 to 20 mA,
HART, Profibus PA, Foxcom or FOUNDATION Fieldbus-H1
OPERATING TEMPERATURE: -40 to 80 ºC

by Mats Mats

PC 25, IP 65 INPUT 4 to 20 mA

PC25
An instrument that converts a standard DC signal to a standard pneumatic signal, for the change-over from electrical controllers to pneumatic control valves, or from electrical measuring system to pneumatic controllers.

IP RATING: IP 65
INPUT: 4 to 20 mA
OUTPUT:
0,2 to 1 bar (3 to 15 psi)
0,4 to 1,2 bar (6 to 18 psi)
OPERATING TEMPERATURE: -40 to 85 ºC

by Mats Mats

TRPT1, Male thread ISO 7/1 Rp (BS21) – 1/2”

TRPT1
The TRPT1 Pt100 resistance temperature sensors are specially designed for general industrial use. The sensing element is an RTD three wire device according to EN 60751 Class A.

SIZES AND CONNECTIONS: Male thread ISO 7/1 Rp (BS21) – 1/2”
IP RATING: IP 66 (KNE enclosure)
OUTPUT: 3-wire RTD or 4 to 20 mA (2-wire)

by Mats Mats

SPS-21, Male threaded ISO 7 R 1/2”

SPS-21
The ADCATROL SPS-21 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.

SIZES AND CONNECTIONS: Male threaded ISO 7 R 1/2”
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: 239 ºC
IP RATING: IP 65

by Mats Mats

SPS-33 Male threaded ISO 7 R 1/2”

SPS-33
The ADCATROL SPS-33 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.

SIZES AND CONNECTIONS: Male threaded ISO 7 R 1/2”
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: 239 ºC
IP RATING: IP 65