by

AFZ Vent valves Stainless steel 3/8” and M22.

AFZ
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.

AFZ – Anti-freeze device – Automatic discharge of condensate from steam traps, valves, pipelines and others, to prevent the condensate from freezing.

by

HVV vent valves Stainless steel 3/8” and M22.

HVV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.

HVV – Hand vent valves – Venting of float traps and generally to be used as a vent or depressurization valve.

by

BDV vent valves Stainless steel 3/8” and M22

BDV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.

BDV – Blowdown valves – Manual discharge of strainer screen contents and generally to be used as a drain and/or depressurization valve.

MATERIAL: Stainless steel
SIZES: 3/8” and M22
CONNECTIONS:
NPT-M
Threaded ISO 228 G
Metric fine pitch
MAX. OPERATING PRESSURE: 42 bar
MAX. OPERATING TEMPERATURE: 400 ºC

by

DF Series are compact noise diffusers, Stainless steel 1/2”- 1”

DF
The ADCA DF series are compact noise diffusers designed to disperse the high-speed discharge from steam or air traps, dampening the noise levels and reducing erosion. These devices are typically installed downstream of intermittent steam traps, such as thermodynamic or inverted bucket, which are generally associated with high-speed blast discharges. Noise reductions greater than 80% can be expected when measured at 1 meter away from the source.

MATERIAL: Stainless steel
SIZES: 1/2’’- 1’’
CONNECTIONS: Threaded ISO 7 Rp
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE:

by

CDV32 Carbon steel 1/2”- 3/4”, DN 15- 20

CDV32
The CDV32 condensate drain valve automatically discharges air and condensate from steam systems during start-up. A compression spring keeps the valve open when the system is not pressurized. As soon as the operating pressure reaches the closing pressure to which the CDV is set, the valve closes. If the operating pressure drops below the closing set pressure, the spring force will cause the CDV32 to open once again.

MATERIAL: Carbon steel
SIZES: 1/2”- 3/4”, DN 15- 20
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME B16.11
Butt weld (BW) ASME B16.25 on request
MAX. OPERATING PRESSURE: 22 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 780 kg/h