VB16
The VB16 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
MATERIAL: Stainless steel
SIZES: 1/2” to 1”
CONNECTIONS: Threaded ISO 7 Rp
LIMITING CONDITIONS: 12 bar at 150 ºC, 16 bar at 120 ºC
FA21SS series.
Compressed air float traps are specially designed for draining water from high pressure compressed
air and gas lines. Applications on aftercoolers, separators and compressed air and gas mains.
An air balance pipe must be fitted allowing the air trapped in the trap body to escape,
avoiding obstructing of condensate flow. Connections are flanged or female screwed.
MODELS:FA 21SS-21.
SIZES: DN 1/2” – 1”, DN 15 – DN 25.
CONNECTIONS:
Female screwed ISO 7/1Rp(BS21)
Flanged EN 1092-1 PN40 or ANSI.
PMO – Max. operating pressure 21 bar
TMO – Max. operating temperature 200 ºC
FA 32-21 and FA 32-32.
FA 32 series compressed air float traps are specially design for draining waterfrom hight
pressure compressed air and gas lines. Applications on aftercoolers, separators and
compressed air and gas mains. An air balance pipe must be fitted allowing the air trapped in
the trap body to escape, avoiding obstructing of condensate flow. Connections are female screwed.
PMA : Max.allowble pressure 40 bar
TMA : Max.allowble temperature 400 oC
PMO : Max.operating pressure 32 bar
TMO : Max.operating temperature 200 oC
FA 20 series.
Compressed air float traps are specially designfor draining water from hight pressure compressed air and
gas lines. Applications on aftercoolers, separators and compressed air and gas mains. An air balance pipe
must be fitted allowing the air trapped in the trap body to escape, avoiding obstructing of condensate
flow. Connections are female screwed.
Main Features:
Modulating discharge. Unaffected by sudden or wide load and pressure changes.
Options :
Inter strainer (only on horizontal models). Equalizing and drain plug on body. Lifting lever.
Use: Compressed air and non corrosive gas, compatible with the construction.
PMA : Max.allowble pressure 40 bar
TMA : Max.allowble temperature 400 oC
PMO : Max.operating pressure 32 bar
TMO : Max.operating temperature 200 oC
BDV
The BDV, AFZ and HVV vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others.
BDV – Blowdown valves – Manual discharge of strainer screen contents and generally to be used as a drain and/or depressurization valve.
MATERIAL: Stainless steel
SIZES: 3/8” and M22
CONNECTIONS:
NPT-M
Threaded ISO 228 G
Metric fine pitch
MAX. OPERATING PRESSURE: 42 bar
MAX. OPERATING TEMPERATURE: 400 ºC
DF
The ADCA DF series are compact noise diffusers designed to disperse the high-speed discharge from steam or air traps, dampening the noise levels and reducing erosion. These devices are typically installed downstream of intermittent steam traps, such as thermodynamic or inverted bucket, which are generally associated with high-speed blast discharges. Noise reductions greater than 80% can be expected when measured at 1 meter away from the source.
MATERIAL: Stainless steel
SIZES: 1/2’’- 1’’
CONNECTIONS: Threaded ISO 7 Rp
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE:
VB21-VB21M
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
MATERIAL: Stainless steel
SIZES: 1/2” x 1/8”
CONNECTIONS:
System: vertical connection 1/2”
Air inlet: horizontal connection 1/8”
Threaded ISO 7 Rp
Threaded ISO 7 R
LIMITING CONDITIONS: 13 bar at 400 ºC, 21 bar at 220 ºC
UBS90
The UBS90 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX90 four bolt universal connectors.
MATERIAL: Stainless steel
SIZES: According to the selected pipeline connector
FLOW RATE CAPACITY: Up to 5400 kg/h
