by

FLT30 Carbon steel ½”-1”, Dn 15 – Dn 25

FLT30
The FLT30 is a series of float and thermostatic steam traps with integral air vent designed for modulating discharge of condensate, ensuring maximum system heat transfer.
Typical applications include unit heaters, heat exchangers, dryers, jacketed vessels and other applications where continuous discharge is essential.

MATERIAL: Carbon steel
SIZES: 1/2” to 1”; DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 495 kg/h

by

FLT314TW Carbon steel 3” , Dn 80

FLT314TW
The FLT314TW is a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer.Specially designed for applications where continuous drainage is essential and high loads are involved.

MATERIAL: Carbon steel
SIZES: 3” ; DN 80
CONNECTIONS:
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
MAX. OPERATING PRESSURE: 12 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 100000 kg/h

by

FLT312, 2”- Dn 50 / FLT314, 2½”- Dn 65, Carbon steel

FLT312 – FLT314
The FLT312 and FLT314 are a series of high capacity float and thermostatic steam traps with integral air vent, designed for modulating discharge of condensate to ensure maximum system heat transfer.Specially designed for applications where continuous drainage is essential and high loads are involved.

MATERIAL: Carbon steel
SIZES:
FLT312 – 2” ; DN 50
FLT314 – 21/2” ; DN 65
CONNECTIONS:
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
MAX. OPERATING PRESSURE: 12 bar
MAX. OPERATING TEMPERATURE: 250 ºC
FLOW RATE CAPACITY: Up to 50000 kg/h

by

AE41.2 Stainless steel 1”x ½”, Dn 25x 15

AE41.2
The AE41.2 range of automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

MATERIAL: stainless steel
SIZES: 1” x 1/2” ; DN 25 x 15
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

AE31.2 Carbon steel 1”x ½”, Dn 25x 15

AE31.2
The AE31.2 range of automatic vents are designed to remove air or gases from water and or other liquid systems, without requiring any external source of energy. They are capable of handling significant loads during start-up while still being able to discharge smaller loads in continuous modulating operation with one single orifice.

MATERIAL: Carbon steel
SIZES: 1” x 1/2” ; DN 25 x 15
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

FA45.1 Stainless steel 1”, Dn 25

FA45.1
The FA45.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

MATERIAL: Stainless steel
SIZES: 1” ; DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

FA41.1 Stainless steel ½”-1, Dn 15- Dn 25

FA41.1
The FA31.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

MATERIAL: Stainless steel
SIZES: 1/2” to 1” – DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

FA35.1 Carbon steel 1”, Dn 25

FA35.1
The FA35.1 is a series of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

MATERIAL: Carbon steel
SIZES: 1” ; DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

FA31.1 Carbon steel ½”-1”, Dn 15- Dn 25

FA31.1
The FA31.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

MATERIAL: Carbon steel
SIZES: 1/2” to 1”; DN 15 to DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 40
Flanged ASME B16.5 Class 150 or 300
Socket weld (SW) ASME 16.11
MAX. OPERATING PRESSURE: 32 bar
MAX. OPERATING TEMPERATURE: Up to 250 ºC

by

FA25.1 SG iron 1” , Dn 25

FA25.1
The FA25.1 is a range of fully automatic ball float traps specially designed for condensate drainage in compressed air and gas systems. Typical applications include aftercoolers, separators and compressed air mains.

MATERIAL: SG iron
SIZES: 1” ; DN 25
CONNECTIONS:
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1/-2 PN 16
Flanged ASME B16.42/B16.5 Class 150
MAX. OPERATING PRESSURE: 14 bar
MAX. OPERATING TEMPERATURE: 198 ºC