by

Humidity separators, S16S Dn 1/2”- 2” Carbon steel

S16
The S16 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by suitable steam or compressed air trap.

MATERIAL: Carbon steel
SIZES: 1/2” to 2”
CONNECTIONS: Female threaded ISO 7 Rp or NPT
RATING: PN 16 and PN 40

by

PPO14, Dn 25, Dn 40 – Dn 50 Carbon and stainless steel

PPO14
The ADCAMAT PPO (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.

MATERIAL: Carbon and stainless steel
SIZES: DN 25, DN 40 and DN 50
CONNECTIONS: Flanged EN PN16, Threaded ISO 7 Rp
MAX. ALLOWABLE PRESSURE: 16 bar
MAX. MOTIVE PRESSURE: 10 bar
MAX. RELATED TEMPERATURE: 250 ºC
RATING: PN16

by

PPA312, Dn 50×50 – Dn 80×50 Carbon steel

PPA312
The ADCAMAT PPA series is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or gas and can be used for lifting any kind of non-corrosive liquids.

MATERIAL: Carbon steel
SIZES: DN 50 x 50 – DN 80 x 50
CONNECTIONS:
Flanged EN PN16
Flanged ASME Class 150
Special flanges on request
MAX. ALLOWABLE PRESSURE: 16 bar
MAX. MOTIVE PRESSURE: 10 bar
MAX. ALLOWABLE TEMPERATURE: 250 ºC

by

POPS-K – Triplex

POPS-K – Triplex
A POPS-KT (Triplex) packaged unit is comprised by three ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection.

by

POPS-K – Simplex

POPS-K – Simplex
A POPS-K packaged unit is comprised by an ADCAMat pump, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection. Packaged units save time, work and site costs. In addition, they ensure that the installation of the pump is correct in every detail.

by

POPS-K – Duplex

POPS-K – Duplex
A POPS-KD (Duplex) packaged unit is comprised by two ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection

by

PPA14, Dn 80 x 50 Carbon steel

PPA14
The ADCAMAT PPA (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.

MATERIAL: Carbon steel
SIZES: DN 80 x 50
CONNECTIONS:
Flanged EN PN16
Flanged ASME Class 150
Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE: 10 bar
FLOW RATE CAPACITY: 6290 kg/h

by

POPS, Dn 25,Dn 40, Dn 50, Dn 80×50 Carbon steel

POP S
The ADCAMAT POP (Pressure Operated Pump), fabricated in carbon steel (stainless steel on request), is recommended in the transfer of high-temperature liquids such as condensate, oils and others, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or other gases, and can be used for lifting any kind of non-corrosive liquids.

MATERIAL: Carbon steel
SIZES: DN 25 ; DN 40 ; DN 50 ; DN 80 x 50
CONNECTIONS: Flanged EN PN16, Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE: 10 bar
FLOW RATE CAPACITY: 6080 kg/h

by

POPS, Dn100x100 Carbon steel

POP S DN 100
MATERIAL: Carbon steel
SIZES: DN 100 x 100
CONNECTIONS: Flanged EN PN16, Threaded ISO 7 Rp
MAX. MOTIVE PRESSURE: 10 bar
FLOW RATE CAPACITY: 29800 kg/h

by

POP-LC, Dn 25 LC, Dn 40 LC, Dn 40×25 LC Carbon and stainless steel

POP-LC
The ADCAMAT POP-LC (Pressure Operated Pump) is recommended in the transfer of high-temperature liquids such as condensate, oils and other liquids to a higher elevation or pressure. The pump starts when there is something to pump and stops when there isn’t. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or gas and can be used for lifting any kind of non-corrosive liquids.

MATERIAL: Carbon and stainless steel
SIZES: DN 25 LC, DN 40 LC, DN 40 x 25 LC
CONNECTIONS:
Flanged EN PN16
Threaded ISO 7 Rp
Others on request
MAX. MOTIVE PRESSURE: 10 bar